Study the Effect of Cu Doping on Optical and Structural Properties of NiO Thin Films
Said Benramache✉، Boubaker Benhaoua، Hanane Guezzoun
الملخّص
Abstract In this work, copper doped nickel oxide as the thin films have been elaborated by a spin coating method, the nickel chloride hexahydrate (0.8M) and copper (II) chloride dehydrate (Cu/Ni = 0, 2.15, 4.3, 8.6 and 12.9 At.%) were used to prepare the Cu doped NiO thin films. The Cu doped NiO thin films were heated at a crystallization temperature of 600 °C with 2 h. The obtained thin films by spin coater method have a film thickness in the order of 400 nm. The prepared Cu doped NiO thin films have a polycrystalline with cubic structure (200) peak was observed. The optical property shows that the prepared thin films have a transmittance of about 70 %. The Cu doped NiO thin films have minimum bandgap energy is 3.85 eV at 12.9 at.%, the thin film deposited at 8.6 at.% has the highest value of Urbach energy is 425 meV. The Cu doped NiO thin films have a high electrical conductivity of 8.6 at% it is 7 (Ω.cm) −1 . The prepared Cu doped NiO thin film was suitable for gas sensing applications due to the existing phase and higher electrical conductivity.
التفاصيل
| اللغة الأصلية | English |
|---|---|
| المجلّة | Annals of West University of Timisoara - Physics |
| المجلّد | 62 |
| العدد | 1 |
| الصفحات | 15-22 |
| الناشر | De Gruyter Open |
| ISSN | 1224-9718 · 2784-1057 |
| DOI | 10.2478/awutp-2020-0002 |
| حالة النشر | منشور — 26 ماي 2020 |
الكلمات المفتاحية
البصمة
- ZnO doping and properties
- Chemical and Physical Properties of Materials
- Gas Sensing Nanomaterials and Sensors
- NiO thin films
- spin coating
- optical properties
- structural properties
- band gap
- Urbach energy
- electrical conductivity
- gas sensing
- Materials Chemistry
- Electrical and Electronic Engineering
- Materials Science
- Engineering